MEASURE TOP DIAMETER OF CUPS.
CUT AND TEST FIT PLASTIC CHROME EDGE TRIM.
DO NOT PUT ON YET.
PLACE CUT OUT PLATE ON TRAY, OR CONSOLE.
MAKE SURE IT IS IN THE FINAL PLACE.
GLUE CUP HOLDERS TO BOTTOM OF TRAY.
I USED CLEAR SILICONE.
THEN REMOVE TOP PLATE AND GLUE OUTSIDE OF OF CUPS.
CUT AND TEST FIT PLASTIC CHROME EDGE TRIM.
DO NOT PUT ON YET.
PLACE CUT OUT PLATE ON TRAY, OR CONSOLE.
MAKE SURE IT IS IN THE FINAL PLACE.
GLUE CUP HOLDERS TO BOTTOM OF TRAY.
I USED CLEAR SILICONE.
THEN REMOVE TOP PLATE AND GLUE OUTSIDE OF OF CUPS.
PAINT CUPS AND TRAY, OR YOUR CONSOLE.
SAND EDGES OF TOP PLATE.
SPRAY IT WHATEVER COLOR YOU WANT.
THEN COAT WITH CLEAR IF DESIRED.
SPRAY IT WHATEVER COLOR YOU WANT.
THEN COAT WITH CLEAR IF DESIRED.
FASTEN TOP PLATE OVER CUPS TO CONSOLE.
I USED THE SILICONE AGAIN.
I USED THE SILICONE AGAIN.
AFFIX CHROME EDGE TRIM TO CUPS.
SINCE I BROKE UP THE NON-E-BRAKE TRAY,
I PUT A SMALL SUPPLY OF KLEENEX IN THE SLOT.
I PUT A SMALL SUPPLY OF KLEENEX IN THE SLOT.
END OF INSTRUCTION
