BACK

END OF
INSTRUCTION

Making your own wire harness.
I bought wire in 5 colors, red, yellow, blue white and black.
To determine how much wire I needed, I measured with a tape measure where I was going to run the wires, including down thru the kick panels and doors, then added 4 foot. You will need the extra.
I did this to match the wire diagram for later reference.
Draw up a diagram using the colors you used mapping out the colors to the doors.

For the 4-door I layed the wires out and spray painted them with sections of:

1. Black on a red wire
2. Black on a yellow wire
3. Blue on a red wire
4. Blue on a yellow wire
5. White on a red wire
6. White on a yellow wire
7. Black on a blue wire
8. White on a black wire
9. Red on a white wire

For the 2-door I would use:

1. Black on a yellow wire
2. Black on a red wire
3. Blue on a red wire
4. Black on a blue wire
5. White on a black wire
6. Red on a white wire

Then I wrapped the passenger runs together with friction tape.

1979 WIRING DIAGRAMS AND MAKE YOUR OWN HARNESS
for other years look at the section on

CLICK AN IMAGE TO ENLARGE

VACUUM AND WIRING

My
Cars

Stickers

Clock, Shirt & Model

Car Display
 Boards

Videos

Zephyr Literature

Manuals & Diagrams

How To
Guides

Restoration Reproduction